Install DOTS. Lighting easily and stress-free – step by step
DOTS. LIGHTING assembly instructions
DOTS. Lighting is a wall decoration with integrated light, designed with aesthetics and functionality in mind. A well-thought-out design and clear installation instructions allow for simple and safe installation, without the need for specialists. On this page, you'll find all the necessary step-by-step instructions to guide you through the installation process and fully enjoy your new interior design element.
#1
Practical tips before installation
Before beginning the installation of DOTS. Lighting, ensure that the installation site is properly prepared and that all work is performed in accordance with safety regulations.
Practical tips before installation
Remember:
Before installation, turn off the power to the electrical circuit in which the lamp will be installed.
Prepare the necessary tools:
- Drill
- Spirit level
- Screwdriver
- Voltage meter
step 1
DOTS Layout. Wall Lighting
Plan the placement of DOTS. Lighting on the wall. Using a spirit level or laser level, precisely measure and mark the drilling points. Precisely marking the mounting locations will ensure the lamp is mounted neatly and evenly.
step 2
DOTS Lighting Installation
1. Mounting the handle
Unscrew the flat lamp disc from the mounting bracket. Place the bracket in the desired location and mark the drilling points. Drill holes in the wall, insert wall plugs, and then screw the bracket into place, ensuring it is secure and level.
2. Electrical connection
Use a meter to check that the circuit is disconnected from the power. Connect the wires coming from the wall to the lamp wires according to the markings. Ensure the wires are securely connected.
3. Attaching the lamp
Carefully place the lamp onto the mounting bracket. Slide it in and tighten it clockwise until the lamp is firmly seated against the wall. Make sure the DOTS graphic is straight.
4. Functional test
Turn on the power to the electrical circuit and check that DOTS. Lighting is operating properly.