Install ARCH easily and without stress – step by step
ARCH INSTALLATION INSTRUCTIONS
The ARCH wall decoration is made of Wallstick material. This high-quality, self-adhesive fabric allows for quick and clean installation and, if necessary, easy, traceless removal. Wallstick's base is a textile surface with a factory-applied adhesive layer. Thanks to modern technology, the ARCH decoration can be applied to any smooth surface: walls, furniture, doors, or windows. It is stain-resistant, deformable, and requires no additional adhesive. ARCH is a semi-matte material with a linen texture, fully self-adhesive and repositionable, making installation quick, simple, and hassle-free.
Practical tips before installation
Remember the wall must be:
- Free from cavities
- Degreased
- Primed
- Dry
- Free from dust and dirt
#1
Preparing the wall
The wall must be smooth, dry, clean, and primed with an appropriate primer. The wall color should be uniform, without any strong contrasting areas. Freshly applied plaster or freshly painted walls should be allowed to dry for approximately three weeks. Ceramic and latex paints, as well as any surfaces with poor adhesion, should be sanded before priming. To achieve a perfect result, smooth out any imperfections. An improperly prepared wall may prevent proper installation of ARCH.
#2
ARCH Check
Unroll ARCH on a clean surface and check that the product you received matches your order. Ensure ARCH is free from any manufacturing defects, such as deformation or discoloration. If ARCH has manufacturing defects, submit a warranty claim before installation. Once ARCH is installed, warranty claims for manufacturing defects are no longer possible!
step 1
Plan ARCH on the wall
To precisely install ARCH in the gluing location, measure and mark the lines using a laser level. These lines on the wall will help center the pattern correctly. Always start gluing ARCH from the top.
step 2
ARCH assembly
Starting from the top, peel approximately 10 cm of the backing from the ARCH adhesive layer. Bend the backing away, then place the ARCH on the wall, aligning the spirit level with the printout markings, and adhere the top of the ARCH. Apply the ARCH from top to bottom, gradually separating the backing from the adhesive layer. Press the decoration down with a squeegee to remove excess air. Regardless of the tool used, installation should be done carefully to avoid damaging the material.