The resin is supplied in pre-weighed packages ready for mixing. The components should be mixed in a ratio of 5:1, i.e. for every 100g of component A, add 20g of component B. Add component B to component A according to the indicated proportions. DO NOT CHANGE THE PROPORTIONS OF COMPONENTS. The components should be thoroughly mixed together, as poorly mixed components may not cure properly on the painted surface. Measure only the amount of resin needed for the current layer.
Apply the resin using a clean roller that does not leave any traces. For a glossy effect, use only glossy-type resin, and the same applies to the matte version. It is necessary to apply two or more layers of resin at intervals of 6 hours, but no more than 24 hours, layer by layer. The product should be mixed during application and used within a maximum of 60 minutes. After application and curing, a minimum of 24 hours, all adjacent edges of the wallpaper with other surfaces should be sealed with silicone.