The ARCH wall decoration is made of Wallstick material – a high-quality self-adhesive textile that allows for quick, clean installation and easy removal without leaving any residue. The base of Wallstick is a fabric with a factory-applied adhesive layer. Thanks to modern technology, the ARCH decal can be applied to any smooth surface – walls, furniture, doors, or glass. It doesn’t stain, warp, or require any additional glue. ARCH is a semi-matte, linen-textured, fully repositionable self-adhesive material that makes installation fast, simple, and stress-free.
The wall must be smooth, dry, clean, and primed with the appropriate primer. The wall color should be uniform, without strongly contrasting areas. Freshly plastered or newly painted walls should be left to dry for about three weeks. Ceramic paints, latex paints, and any poorly adhesive surfaces should be sanded with sandpaper before priming. To achieve the perfect effect, eliminate all defects. An improperly prepared wall can prevent the correct installation of the DOTS.
Unroll the ARCH on a clean surface and check whether the received product matches your order. Make sure the ARCH is free of manufacturing defects such as deformations or discoloration. If you notice any production flaws, please submit a complaint before installation. Once the ARCH is applied, factory defects can no longer be claimed!
To install the ARCH precisely in the desired spot, measure and mark guide lines on the wall using a laser level. These lines will help you center the design correctly. Always start applying the ARCH from the top.
Starting from the top, peel off about 10 cm of the backing paper from the adhesive side of the ARCH. Fold the backing down, then place the ARCH on the wall so that the laser level lines align with the markers on the print, and attach the top part to the wall. Apply the ARCH from top to bottom while gradually removing the backing paper. Press the decoration firmly using a squeegee, smoothing out any air bubbles. Regardless of the tool used, installation should be done carefully to avoid damaging the material.
